Page 1 of 1
Dolls - R1US vs. R2BE vs. R2UK
Posted: 03 May 2008, 13:11
by Lourdes
Posted: 03 May 2008, 13:12
by Lourdes
Same extras and subtitles.
Hopefully someone can add R2J (and possibly other) caps.
Posted: 03 May 2008, 13:22
by HungFist
I used to have the R2J but I think it was a bit soft. I also recall the colors being similar to those R1 caps.
I now have the Spanish disc. I don't have it at hand right now, but I think it's similar to the UK disc. Actually, wouldn't be surprised at all if it was a port.
Posted: 03 May 2008, 13:50
by Lourdes
I think Palm used the same master and then hired apes to do their own encode.
Posted: 03 May 2008, 14:19
by EvaUnit02
My God, the R1 is a hunk of shit.
Posted: 03 May 2008, 16:24
by tom2681
I'll add some belgian caps later.
Posted: 03 May 2008, 18:19
by bradavon
Lourdes: Could you mention it's the USA R1 please.
The Canadian R1 is a DVD5 PAL to NTSC transfer and barebones too. The R1 I believe is Native NTSC but I didn't know it was Interlaced.
Palm Pictures: USA
Seville: Canadian
I used to own the USA R1. It was ropey but watchable. I ended up selling it on eBay.
EvaUnit02 wrote:My God, the R1 is a hunk of shit.
Do you have the R4 Eva?
Hopefully it has a decent transfer as the UK DVD is only DD2.0.
Posted: 03 May 2008, 19:50
by EvaUnit02
I don't own any copy of this film.
Posted: 03 May 2008, 20:19
by bradavon
Fair enough. I thought you bought it during a Madman sale.
Cheers Lourdes.
Posted: 03 May 2008, 21:52
by tom2681
Belgian caps added.
Same as the R2UK, except there's more grain.
Based on cap n°7, I suspect that the bitrate is higher on the R2BE (there's more detail in the sand).
Posted: 03 May 2008, 22:19
by Lourdes
Video on the R2UK is 4.23GB. I wouldn't think that the Belgian disc would be much different, not that you can really compare bitrates unless there's a dramatic difference as encoders vary so much. The R2BE is sharper which is why there's a little more detail and grain but there isn't enough bitrate for this which translates into more artefacts and noise.
Posted: 03 May 2008, 22:37
by bradavon
Posted: 03 May 2008, 22:40
by tom2681
Fixed it.
